The three-axis screw machine is composed of a feeding system and a locking system. The feeding part, also known as the screw arrangement machine and screw supply machine, is a relatively simple small automated device that arranges screws in a row to improve work efficiency. It is widely used in the electronic industry. One machine can be used for various specifications of screws

There is already some room for adjustment in the size range of the screws. From M1 to M8, and for special screws, there is an operable space, designed separately.

1: Both short screws and screws with washers can be used universally!

Easy track adjustment! The track of the screw machine can be pulled out and adjusted freely! Easy to understand and operate!

Nowadays, the technology of screw machines is very mature, so the phenomenon of screw machine jamming has rarely occurred again. If there is a phenomenon of missing screws, it will automatically alarm, so it reduces the phenomenon of workers doing useless work at work.

The current screw machine equipment is independently controlled in the feeding system and vibration drive, and can freely set the ideal delay stop time. When abnormal situations occur, the screw machine will activate the fault alarm function! It is as easy to operate as other screw machines!

When removing the screw, simply place the screwdriver head into the screwdriver head guide, slide down along the guide, and then pull out the screw towards the front

Compared to traditional screw discs, each screw can save 1.4 seconds and achieve a production rate of up to 6 times!

Easy to operate, even beginners can immediately learn the operation method

There is no need to align the screws, just put them into the feeding room in batches

Widely applicable to various electronic industries, automobiles, televisions, air conditioning, and other industries that require screws.

Grape eaters:

When extracting screws, simply place the tip of the nozzle into the nozzle guide, slide it downwards along the guide, and then pull out the screw in the direction of the user.

Compared to traditional screw discs, extracting each screw can save 1.4 seconds, thus improving production efficiency by up to 4 times.

Easy to operate, first-time users can also learn operating methods in real-time.

Widely applicable to various types, lengths, and head shapes of screws. (Currently, the length is basically less than 20mm)

◆ Small in size, one operator can operate multiple screw conveyors simultaneously.