From the design and principle of the automatic locking screw machine, it does not have any major shortcomings in itself, but there are many processes that everyone will overlook a problem, which is screw quality! Compared to foreign countries, domestic screw manufacturers produce more defective screws, such as large heads, flat heads, and sharp edges, which are the killers of automatic locking screw machines. They are deadly to automatic locking screw machines, so it is also very worth considering when selecting screws. Firstly, we need to understand the root cause of screw slippage, and the most crucial ones are jamming, slippage (not locking tightly), and flower heads, all of which are caused by poor screw quality. Or if the manufacturer changes the design size to deal with poor screw quality, it is impossible for the vast majority of screw machine manufacturers to handle and is a fatal disease!!! In addition, there are issues with the machine itself, such as the materials, processes, and brands used in electronic components. However, these are not significant issues, as capable manufacturers can handle this issue. The jamming is caused by defective screws, and there are two fundamental reasons for the so-called slip teeth and flower heads. Firstly, there is a problem with the design and construction of the screw machine itself. Secondly, the screw machine manufacturer has increased all the screw machine channels to handle the above irregular screws, including the electric screwdriver nose. Excessive diameter of the electric screwdriver nose is the biggest root cause of floating teeth and flower heads!

Precautions for the application of air blowing automatic locking screw machine

1. The screws used should have fewer defects such as debris, mixing, and flower heads, otherwise it will cause the machine to run smoothly.

2. The selected screws should be more commonly used, with a large number and fewer types to improve the application efficiency of automatic screw machines.

3. The rotation of the electric screwdriver locking nozzle on the electric screwdriver sliding sleeve should be maintained smoothly, otherwise it will make it difficult for screws to enter the electric screwdriver locking nozzle and interfere with the application of the automatic locking screw machine.

4. The locking screws should be of uniform size as much as possible to prevent uneven depth, uneven surface, and narrow space.

5. Do not bend the screw conveying pipeline, otherwise the screw may get stuck at the bend during the screw transportation process.