What factors will affect the dispensing effect of the dispensing machine?

1. The size and stability of the dispensing pressure will affect the dispensing effect;

Adjust the appropriate air pressure before dispensing. If the air pressure is too high, the glue will overflow, causing too much glue; If the pressure is too low, it can cause intermittent glue feeding, poor glue mixing effect, and unstable air pressure can also cause uneven glue mixing during OEM dispensing.2. The viscosity of the glue solution will affect the dispensing effect of the substitute processing;

High viscosity, slow glue, and easy to pull; The viscosity is too low and the fluidity is strong, making it difficult to control the glue and making it easy to lose the glue. Therefore, choosing a suitable viscosity glue is also an effective solution to the problem of glue efficiency during dispensing.

3. The distance between the needle of the dispensing machine and the contact surface can also affect the effect of dispensing in OEM processing;

Before processing the dispensing machine, calibrate the distance between the dispensing needle and the working surface, observe the dispensing effect under different parameters, and summarize a reasonable dispensing plan for processing.